Xantrex Technology Video Game Controller 809 0910 User Manual

TM  
TM  
Owner’s Guide  
System Control  
Panel  
 
TM  
TM  
System Control Panel  
Owner’s Guide  
 
About Xantrex  
the development, manufacturing and marketing of advanced power electronic products and systems for  
the renewable and mobile power markets. The company's products convert and control raw electrical  
power from any central, distributed, renewable, or backup power source into high-quality power  
required by electronic equipment and the electricity grid. Xantrex is headquartered in Vancouver,  
Canada, with facilities in the United States, Germany, Spain, India, and a joint venture in China.  
Trademarks  
Xantrex, Smart choice for power, and Xanbus are trademarks of Schneider Electric International  
Services sprl, registered in the U.S. and other countries. Other trademarks, registered trademarks, and  
product names are the property of their respective owners and are used herein for identification  
purposes only.  
Notice of Copyright  
System Control Panel Owner’s Guide © February 2010 Xantrex Technology Inc. All rights reserved.  
No part of this document may be reproduced in any form or disclosed to third parties without the  
express written consent of: Xantrex Technology Inc., 161-G South Vasco Road, Livermore, California,  
USA 94551. Xantrex Technology Inc. reserves the right to revise this document and to periodically  
make changes to the content hereof without obligation or organization of such revisions or changes  
unless required to do so by prior arrangement.  
Exclusion for Documentation  
UNLESS SPECIFICALLY AGREED TO IN WRITING, XANTREX TECHNOLOGY INC. (“XANTREX”)  
(A) MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY TECHNICAL OR  
OTHER INFORMATION PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION;  
(B) ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSSES, DAMAGES, COSTS OR EXPENSES, WHETHER  
SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE OUT OF THE USE OF  
SUCH INFORMATION. THE USE OF ANY SUCH INFORMATION WILL BE ENTIRELY AT THE USERS RISK; AND  
(C) REMINDS YOU THAT IF THIS GUIDE IS IN ANY LANGUAGE OTHER THAN ENGLISH, ALTHOUGH STEPS  
HAVE BEEN TAKEN TO MAINTAIN THE ACCURACY OF THE TRANSLATION, THE ACCURACY CANNOT BE  
GUARANTEED. APPROVED XANTREX CONTENT IS CONTAINED WITH THE ENGLISH LANGUAGE VERSION  
WHICH IS POSTED AT WWW.XANTREX.COM.  
Date and Revision  
Part Number  
February 2010 Revision D  
975-0083-01-01  
Product Number  
809-0910  
Contact Information  
Telephone: 1 800 670 0707 (toll free North America)  
1 408 987 6030 (direct)  
Fax:  
1 800 994 7828 (toll free North America)  
Email:  
Web:  
 
About This Guide  
Purpose  
The purpose of this Owner’s Guide is to provide explanations and  
procedures for installing, operating, maintaining, and troubleshooting the  
System Control Panel.  
Scope  
The Guide provides safety guidelines, setup information, and procedures  
for installing and configuring the System Control Panel. This Guide also  
includes information about operating and troubleshooting the unit. This  
Guide does not contain guidelines for configuring every Xanbus-enabled  
device that the System Control Panel monitors and controls. See the  
owner’s guide or operation guide for each Xanbus-enabled device for  
detailed configuration information.  
The information in this manual applies to firmware revision 2.01.00.  
Some System Control Panel features and functions described in this  
manual may be incompatible with earlier firmware revisions. To view the  
firmware revision number of your product, see “Viewing device  
information” on page 4–11.  
Audience  
The Guide is intended for anyone who needs to install and/or operate the  
System Control Panel. Installers should be certified technicians or  
electricians.  
Organization  
This Guide is organized into six chapters and one appendix.  
Chapter 1, “Introduction”, introduces and describes features of the  
Xantrex System Control Panel.  
iii  
 
 
About This Guide  
installing the System Control Panel.  
Chapter 3, “System Configuration”, contains general information for  
using the System Control Panel to configure another device on the  
Chapter 4, “Configuration”, contains information and procedures for  
configuring the System Control Panel.  
Chapter 5, “Operation”, contains information and procedures for  
operating the System Control Panel.  
Chapter 6, “Troubleshooting”, contains reference tables of warning and  
fault messages.  
Appendix A, “Specifications”, contains the electrical, mechanical, and  
environmental specifications for the System Control Panel.  
Conventions Used  
The following conventions are used in this guide.  
WARNING  
Warnings identify conditions or practices that could result in personal injury or  
loss of life  
CAUTION  
Cautions identify conditions or practices that could result in damage to the unit or  
other equipment.  
Important: These notes contain information that is important for you to know,  
but is not as critical as a caution or warning.  
Related Information  
For more information about related products, refer to:  
Xanbus System Installation Guide (975-0136-01-01)  
Automatic Generator Start Owners Guide (975-0082-01-01)  
You can find more information about Xantrex Technology Inc. as well as  
its products and services at www.xantrex.com.  
iv  
975-0083-01-01  
 
 
Important Safety Instructions  
WARNING: Save these instructions  
This Owner’s Guide contains important safety and operating instructions.  
Before using your System Control Panel, be sure to read, understand, and save  
these safety instructions.  
WARNING: Restrictions on use  
The System Control Panel shall not be used in connection with life support  
systems or other medical equipment or devices.  
General Precautions  
1. Before installing and using this device, read all appropriate sections  
of this guide and any cautionary markings on the System Control  
Panel and the devices to which it connects.  
2. If the System Control Panel has been damaged, see “Warranty and  
Return Information” on page WA–1.  
3. Do not dismantle the System Control Panel; it contains no user  
serviceable parts. See “Information About Your System” on  
page WA–4 for instructions on obtaining service.  
4. Protect the System Control Panel from rain, snow, spray, and water.  
Explosive Gas Precautions  
WARNING: Explosion hazard  
This equipment is not ignition protected. To prevent fire or explosion, do not  
install the System Control Panel in compartments containing flammable  
materials or in locations that require ignition-protected equipment. This includes  
any space containing gasoline-powered machinery, fuel tanks, as well as joints,  
fittings, or other connections between components of the fuel system.  
v
 
 
Safety  
FCC Information to the User  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful  
interference when the equipment is operated in a residential environment.  
This equipment generates, uses and can radiate radio frequency energy  
and, if not installed and used in accordance with the instruction guide,  
may cause harmful interference to radio communications. However, there  
is no guarantee that interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and on,  
the user is encouraged to try to correct the interference by one or more of  
the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and the receiver.  
Connect the equipment into an outlet on a circuit different from that  
to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
vi  
975-0083-01-01  
 
Important Safety Instructions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -v  
1
Operational Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–3  
Front panel features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–3  
Back panel features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–5  
2
3
Menu map - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–3  
Viewing the Select Device menu - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–4  
4
Advanced Menu Configuration Items- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4–5  
Using the Clock Menu- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4–6  
Clock Menu Configuration Items - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4–7  
Setting the time - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4–7  
Setting the date - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4–8  
975-0083-01-01  
vii  
 
Contents  
5
Warnings and Faults - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–8  
Clearing warning messages - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5–9  
Viewing individual warning messages from the warning log - - - - - - - - - - 5–11  
6
Troubleshooting  
Troubleshooting Reference - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6–2  
Types of Faults and Warnings - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6–2  
Warning Reference Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6–2  
Fault Reference Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6–4  
viii  
975-0083-01-01  
 
A
Electrical Specifications- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A–2  
Mechanical Specifications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A–2  
Environmental Specifications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A–2  
Warranty and Return Information - - - - - - - - - - - - - - - - - - - - - - - - - - - WA–1  
Index- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - IX–1  
975-0083-01-01  
ix  
 
x
 
Introduction  
1
Chapter 1 introduces and describes features of the  
Xantrex System Control Panel, including the:  
Display screen  
Indicator lights  
Push Buttons  
Connector jacks  
Time-keeping, warning, and power-saving features  
 
     
Introduction  
About the System Control Panel  
Complete  
system control  
The Xantrex System Control Panel provides configuration and  
monitoring capability for a Xanbus system. The System Control Panel:  
Monitors activity throughout your power system.  
Displays the settings and status of each Xanbus-enabled device.  
Enables you to adjust settings for each Xanbus-enabled device.  
System  
component  
The System Control Panel uses Xanbus™, a network communications  
protocol developed by Xantrex, to communicate its settings and activity  
to other Xanbus-enabled devices.  
Xanbus-enabled products are:  
Easy to use. The Xanbus network simplifies operation and automates  
routine tasks.  
Reliable. Software control eliminates errors due to analog signaling.  
Accurate. Digital information is less susceptible to interference and  
line loss.  
Upgradable. Software upgrades mean your purchase will remain up to  
date.  
Important: The System Control Panel is compatible with Xanbus-enabled  
devices including RS, MS, TS and IS Series, and Freedom SW 3000 inverter/  
chargers as well as the Xantrex Automatic Generator Start. The System Control  
Panel is not compatible with Prosine, Freedom SW 2000, Freedom HW, and  
Freedom HF, RV, or SW Series inverter/chargers from Xantrex.  
System  
requirements  
The System Control Panel requires a Xanbus power supply to operate.  
Network power is carried by the network cables, and can be supplied by a  
Xanbus-enabled product (such as an inverter/charger) or an external  
Xanbus power supply.  
As a device that draws network power, the System Control Panel  
consumes a maximum of 3 watts.  
For detailed instructions and a complete list of Xanbus-enabled devices,  
visit the website at www.xantrex.com.  
1–2  
975-0083-01-01  
 
     
Operational Features  
Operational Features  
Other features of the System Control Panel include:  
Time and date—has an internal clock that keeps time for the entire  
system.  
Audible alarm—if enabled, alerts you to a low battery condition in  
the system and notifies you when a fault condition arises.  
Low power consumption—automatically turns off the backlight and  
displays a screensaver after a period of inactivity to minimize battery  
drain.  
Non-volatile memory—preserves all its settings if network power is  
interrupted or network communication is disrupted.  
Physical Features  
The System Control Panel has important features on the front and back of  
the unit. Features on the front of the System Control Panel are the display,  
indicator lights, and buttons for selecting device menus and changing  
settings (see Figure 1-1). The back of the unit features the inputs where  
the System Control Panel connects to the Xanbus system (see Figure 1-2).  
Front panel features  
9
1
2
3
4
10  
5
6
7
8
Figure 1-1 System Control Panel front panel  
975-0083-01-01  
1–3  
 
       
Introduction  
Feature Description  
1
2
3
4
5
AC In/Charge light (green) indicates qualified AC is present at the input of an inverter/  
charger or charger.  
Inverter On light (green) indicates an inverter is using energy from batteries to provide  
AC to your appliances.  
Low Battery light (yellow) indicates that a low battery voltage condition exists in the  
system.  
Fault light (red) indicates a device on the network is experiencing a fault and requires user  
attention and intervention.  
Enter button  
1. Confirms selection of a menu item  
2. Displays the next screen  
6
7
Up arrow button  
1. Scrolls up one line of text  
2. Increases a selected value  
Down arrow button  
1. Scrolls down one line of text  
2. Decreases a selected value  
8
Exit button  
1. Cancels selection of a menu item  
2. Displays the previous screen  
9
System button puts all devices in the system into Safe mode (see page 5–7).  
Hold for five seconds to activate Safe mode.  
Press momentarily to clear active faults.  
10  
Screen shows menus, settings, and system information.  
1–4  
975-0083-01-01  
 
                 
Physical Features  
Back panel features  
Connectors  
Two network connector inputs on the back panel let you connect the  
System Control Panel to other Xanbus-enabled devices. See Figure 1-2.  
Network connectors (8-pin RJ45)  
Figure 1-2 System Control Panel rear panel  
975-0083-01-01  
1–5  
 
   
Introduction  
System components  
System  
The Xanbus system includes the System Control Panel and other Xanbus-  
description  
enabled devices. Each device interacts and communicates with the other  
devices.  
Network  
diagram  
In Figure 1-3, network connections are represented by dotted lines and  
conventional electrical connections are represented by solid lines.  
AC Out  
AC In  
Figure 1-3 Network diagram  
1–6  
975-0083-01-01  
 
   
Installation  
2
Chapter 2 contains information and procedures for  
planning and performing a System Control Panel  
installation, including:  
Materials and tools required  
Choosing a location  
Mounting the unit  
Connecting the System Control Panel to other  
devices  
 
     
Installation  
Installing the System Control Panel  
The System Control Panel is designed to be flush mounted through an  
opening in a wall and secured with four #6 screws. Use the supplied  
mounting template to precisely mark the opening and screw hole  
locations.  
Planning an  
installation  
The System Control Panel requires no connections other than the network  
cables that plug into the back of the unit. Because you cannot access the  
network inputs once the unit is mounted, the network cables need to be  
routed through the wall before securing the System Control Panel.  
CAUTION  
Allow at least 2 ¼ inches (57 mm) of space behind the wall to accommodate the  
depth of the unit and allow room for the network cables to bend.  
Refer to the Xanbus System Installation Guide for more information about  
planning and installing a network that includes the System Control Panel.  
Materials and  
tools required  
You will need these materials and tools to complete the installation:  
mounting template sticker (supplied)  
four #6 screws (supplied)  
Phillips head screwdriver  
jigsaw or small keyhole saw  
power drill with 1/8" bit (optional)  
Xantrex network cables or equivalent  
Choosing a  
location  
Choose a location that is easily accessible. The System Control Panel  
should be mounted where it is easily visible, with unobstructed access to  
the screen and push buttons.  
The location should be indoors, dry, and free from corrosive or explosive  
fumes.  
2–2  
975-0083-01-01  
 
     
Installing the System Control Panel  
WARNING: Fire hazard  
The System Control Panel is not ignition protected. Do not install in areas  
requiring ignition-protected equipment.  
WARNING: Shock hazard  
Before making an opening in a wall, bulkhead, or panel, ensure there is no wiring  
or other obstruction within the wall.  
To mount the System Control Panel:  
1. Peel the backing from the supplied mounting template sticker and  
place it in your chosen installation location. Use the template to mark  
locations for the mounting holes and the area to be cut out.  
2. Pilot-drill the mounting holes (if necessary, depending on your  
mounting surface) and, using a jigsaw, cut out the hole in which the  
System Control Panel will be inserted.  
3. Route the network cable(s) from other Xanbus-enabled devices inside  
the wall and through the opening.  
CAUTION: Equipment damage  
Connect the System Control Panel only to other Xanbus compatible devices.  
:
Although the cabling and connectors used in this network system are the same as  
Ethernet connectors, this network is not an Ethernet system. Equipment  
damage may result from attempting to connect these two different systems.  
4. Connect the network cable(s) (and terminator if necessary) to either  
input on the back of the System Control Panel. See Figure 2-1.  
Connect one network cable and a network terminator to the System  
Control Panel if it is the last device at the end of a daisy chain-type  
network layout. Refer to the Xanbus System Installation Guide for  
more information.  
5. Place the unit in the opening and secure it with four #6 screws.  
6. Peel off the protective plastic coating covering the screen and  
indicator lights.  
975-0083-01-01  
2–3  
 
   
Installation  
Verifyingpower  
is available  
If network power (from an inverter/charger or external power supply) is  
present, the backlight will come on and the System Control Panel will  
show the startup screen (see page 3–3) for five to ten seconds, then show  
the System screen.  
Figure 2-1 Connecting the network cables  
2–4  
975-0083-01-01  
 
     
System  
Configuration  
3
Chapter 3 contains guidelines for using the System  
Control Panel to configure another Xanbus-enabled  
device on the Xanbus system.  
devices on your system. Refer to the Owner’s Guide or  
Operation Guide for each Xanbus-enabled device for  
this information.  
For information about configuring the System Control  
Panel itself, see Chapter 4, “Configuration”.  
 
     
System Configuration  
Configuring the System  
System settings are changed from the System Control Panel. You can also  
use the System Control Panel to view the settings for any Xanbus-enabled  
device in the Xanbus system.  
Using System Control Panel buttons  
The System Control Panel has four buttons for:  
moving between status screens and menus.  
highlighting settings you want to change.  
selecting values for Xanbus-enabled devices.  
See Table 3-1 for the function of each button on the System Control Panel.  
1
2
3
4
Figure 3-1 System Control Panel  
Table 3-1 System Control Panel buttons  
Number Button  
Function  
1
2
3
4
Enter  
Displays the next screen  
Confirms selection of a menu item  
Up arrow  
Down arrow  
Exit  
Scrolls up one line of text  
Increases a selected value  
Scrolls down one line of text  
Decreases a selected value  
Cancels selection of a menu item  
Displays the previous screen  
3–2  
975-0083-01-01  
 
                 
Configuring the System  
Menu map  
Figure 3-2 shows how the System Control Panel screens and menus are  
organized. The screens and menus are described in Table 3-2.  
Power Up  
Startup screen  
System screen  
Standby Inverting  
Charging AC Bypass  
Equalize  
Select Device  
menu  
Inverter/Charger  
menu  
Auto Gen Start menu  
System Panel menu  
Clock menu  
The number of Device menus  
depends on the number of  
Xanbus-enabled devices you  
have installed.  
System Settings  
menu  
Optional device. This menu w  
appear if this device is installe  
=
Figure 3-2 System Control Panel menu map  
975-0083-01-01  
3–3  
 
       
System Configuration  
Table 3-2 Screen and menu descriptions  
Screen or menu  
Description  
Startup screen  
Appears for a few seconds after the system is powered  
on or after the system has been reset.  
System screen  
Displays status information for the power system. The  
System screen’s appearance varies with the status of the  
inverter/charger (Standby, Inverting, Charging, AC  
Bypass, or Equalize). The System screen always  
features a “Menu” arrow pointing to the Enter button.  
Select Device menu Displays a list of Xanbus-enabled devices in the  
system, including the System Control Panel. The length  
of this menu depends on how many devices are  
installed in the system. This menu also contains the  
clock menu (where you can set the time and date) and  
the system settings menu (where you can change  
system modes).  
Device menus  
Display status information and changeable settings.  
Changeable settings are identified by the square  
brackets [ ] around values in the right-hand column (see  
Figure 3-5 on page 3–6).  
Changing settings for a device  
If you need to change a setting for a device on the system, use the buttons  
on the System Control Panel to perform these three basic steps:  
Starting at the System screen, view the Select Device menu.  
Select the device from the Select Device menu.  
Select and adjust a changeable setting on the device menu.  
For more information about configuring devices on the system, see the  
guide for each device.  
Viewing the Select Device menu  
The Select Device menu lists every Xanbus-enabled device in the power  
system.  
To view the Select Device menu:  
On the System screen, press Enter.  
3–4  
975-0083-01-01  
 
               
Configuring the System  
menu  
Figure 3-3 System screen of Freedom SW 3000 (example)  
Selecting the device from the Select Device menu  
Use this procedure to select a device before changing a setting.  
To select a device:  
1. On the Select Device menu, press the down arrow button to highlight  
the device you want.  
InvChg will show if there are no  
compatible inverter/chargers  
connected to the SCP.  
InvChg  
Figure 3-4 Select Device menu  
2. Press Enter.  
The menu for the selected device appears.  
Selecting and adjusting the changeable setting  
Device menu  
You can view and change device settings from the device menu. The  
number of settings on the device menu will depend on whether you have  
selected to view basic or advanced menus. See “Viewing Advanced  
Menus” on page 5–5.  
Identifying  
changeable  
settings  
A device menu displays a list of status information and changeable  
settings. Changeable settings are enclosed in square brackets. Values in  
the right-hand column without brackets are status information only. You  
cannot select or change them.  
Use this procedure to change any device setting.  
975-0083-01-01  
3–5  
 
       
System Configuration  
To select and adjust a setting:  
1. On the device menu, press the up arrow or down arrow button to  
highlight the setting you want to change.  
Figure 3-5 Device menu (System Control Panel menu used for example)  
2. Press Enter to highlight the current value of that changeable setting.  
Figure 3-6 Highlighting a setting  
3. Press the up arrow or the down arrow button to change the value.  
Hold down the button to scroll through a large range of values  
quickly.  
The previously set value appears with an asterisk (*) beside it.  
4. Press Enter to select the value.  
5. If you have another setting to change, return to step 1.  
Or  
If you have no more settings to change, press Exit twice to return to  
the System screen.  
3–6  
975-0083-01-01  
 
   
Configuration  
4
Chapter 4 contains information and procedures for  
configuring:  
the System Control Panel on the System Panel  
menu.  
the time and date on the Clock menu.  
the system mode on the System Settings menu.  
 
     
Configuration  
Configuring the System Control Panel  
You can configure the System Control Panel to suit your preferences and  
the requirements of the Xanbus system. Some of the configurable  
settings, such as the system time, affect the entire system. Other settings  
affect only the System Control Panel itself, such as the brightness of the  
display.  
You can perform all these tasks on the System Panel menu, the Clock  
menu, and the System Settings menu.  
The System Panel Menu  
Configuring the System Control Panel is done on the System Panel menu,  
which you can view in either basic or advanced formats. See “Viewing  
Advanced Menus” on page 5–5 for more information.  
Basic menu  
The basic menu contains settings you may have to adjust routinely. The  
System Control Panel shows the basic menu by default.  
Advanced menu  
The advanced menu contains all items on the basic menu, as well as  
additional configurable settings.  
The advanced menu also contains a command to return it to the basic  
format.  
Figure 4-1 shows which items are on the basic and advanced System  
Panel menus.  
BASIC MENU  
ADVANCED MENU  
System Panel  
Brightness  
Contrast  
Button Beep  
Clear Faults  
System Panel  
Brightness  
Contrast  
Light Timer  
Button Beep  
Fault Alarm  
LoBatt Alarm  
Set Degrees  
Clear Faults  
View Fault Log  
View Warning Log  
View Event Log  
Restore Defaults  
Basic Menu  
Figure 4-1 System Panel menu contents  
4–2  
975-0083-01-01  
 
     
The System Panel Menu  
To view the System Panel menu:  
1. On the Select Device menu, use the down arrow button to highlight  
System Panel.  
InvChg  
Figure 4-2 Highlighting System Panel  
2. Press Enter.  
The System Panel menu appears.  
Figure 4-3 System Panel menu (basic menu shown)  
To change a setting on the System Panel menu:  
1. On the System Panel menu, use the up and down arrow buttons to  
highlight the setting you want to change.  
2. Press Enter to highlight the current value of that setting.  
Figure 4-4 Highlighting the setting  
975-0083-01-01  
4–3  
 
Configuration  
3. Use the up and down arrow buttons to change the value. Hold down  
an arrow button to scroll through a large range of values quickly.  
4. Press Enter to select the value.  
5. If you have another setting to change, return to step 1.  
Or  
If you have no more settings to change, press Exit twice to return to  
the System screen.  
Basic Menu Configuration Items  
The basic System Panel menu contains settings for changing the  
appearance of the display. From the basic menu you can also enable the  
low-battery warning buzzer and make the buttons beep when they are  
pressed.  
Menu  
item  
Values/  
Action  
Description  
Default  
Brightness Adjusts the brightness of the  
display to suit interior light  
20% to 100% 60%  
(incrementsof  
10%)  
conditions and enhance visibility.  
Contrast  
Adjusts the contrast of the display 0% to 100%  
to suit viewing angle and enhance (incrementsof  
60%  
visibility.  
5%)  
Button  
Beep  
Enables buttons to beep when  
pressed. This feature can be a  
useful aid for confirming button  
presses.  
On, Off  
Off  
Clear  
Faults  
Clears active faults generated by  
the System Control Panel.  
Press Enter to n/a  
clear faults.  
4–4  
975-0083-01-01  
 
           
Advanced Menu Configuration Items  
Advanced Menu Configuration Items  
The System Panel advanced menu provides more configuration options.  
The advanced menu contains all items from the basic menu, as well as  
settings for turning the backlight off and selecting the temperature scale.  
You can also restore default settings and view the fault and warning logs  
on the advanced menu.  
Menu  
item  
Values/  
Action  
Description  
Default  
Light Timer Sets how long the backlight  
remains on after the last button  
Off, 1mins–  
60mins  
2mins  
press on the System Control Panel. (increments  
of 1 minute)  
Fault Alarm Enables an alarm to sound when a On, Off  
fault occurs.  
Off  
Off  
LoBatt  
Alarm  
Enables an alarm to sound when a On, Off  
low battery voltage condition  
exists.  
Set Degrees Selects the temperature scale that  
the System Control Panel will  
display.  
Fahrenheit,  
Celsius  
Fahrenheit  
View Fault Displays the Fault Log, containing Press Enter to n/a  
Log  
the last 20 System Control Panel  
faults.  
view log.  
View  
Warning  
Log  
Displays the Warning Log,  
containing the last 20 System  
Control Panel warnings.  
Press Enter to n/a  
view log.  
View Event Displays the Event Log, containing Press Enter to n/a  
Log  
the last 20 System Control Panel  
events.  
view log.  
Restore  
Restores the System Control Panel Press Enter to n/a  
Defaults  
to its original factory or installer  
settings. After restoring settings,  
please ensure that the clock is set  
correctly.  
restore  
defaults.  
Basic Menu Displays the basic menu for the  
System Control Panel only.  
Press Enter to n/a  
view basic  
menu.  
975-0083-01-01  
4–5  
 
                     
Configuration  
Using the Clock Menu  
Use the Clock menu to set the clock, the date, and the time format you  
prefer.  
The clock is listed as a separate device on the Select Device menu.  
To view the Clock menu:  
1. On the Select Device menu, use the up arrow or down arrow button to  
highlight Clock.  
InvChg  
Figure 4-5 Selecting the Clock menu  
2. Press Enter.  
The Clock menu appears.  
Figure 4-6 Clock menu  
4–6  
975-0083-01-01  
 
   
Clock Menu Configuration Items  
Clock Menu Configuration Items  
Menu  
item  
Description  
Values  
Default  
Set Time Sets reference time for the 12:00 AM–11:59 PM,  
n/a  
power system. 00:00–23:59  
Set Date  
Sets the reference date for month day year  
n/a  
the power system.  
(Jul 1, 04, for example)  
12/24  
Hour  
Configures the System  
Control Panel to use a 12-  
hour clock or 24-hour  
clock.  
12hr, 24hr  
12hr  
Setting the time  
Because the System Control Panel keeps time for the power system,  
setting the clock to the correct local time is essential for the system to  
operate as expected. The clock also provides the time stamps for the  
Warning, Fault, and Event logs.  
When you first power up the System Control Panel, it will not begin  
operating normally until you set the time.  
To set the clock:  
1. On the Clock menu, with Set Time highlighted, press Enter.  
2. Press Enter to highlight the hour.  
3. Use the up arrow or down arrow button to change the hour.  
4. When the correct hour is shown, press Enter to select it and highlight  
the minute.  
5. Use the up arrow or down arrow button to change the minute.  
6. When the correct minute is shown, press Enter to select it and  
highlight the AM/PM value.  
If you are using a 24-hour clock, you will return to Set Time at this  
point. Proceed to step 9.  
7. Use the up arrow or down arrow button to choose AM or PM.  
8. When the correct value is shown, press Enter to select it and return to  
the Clock menu.  
9. Press Enter to return to the Select Device menu.  
975-0083-01-01  
4–7  
 
               
Configuration  
If you make an error, press Exit to move back to the value you need to  
reset. If you decide to abandon resetting the time, press Exit  
repeatedly until you return to the Clock menu.  
Setting the date  
You can set the reference date for the Xanbus system from the Clock  
menu.  
To set the date:  
1. On the Clock menu, use the up arrow or down arrow button to  
highlight Set Date.  
2. Press Enter to highlight the month.  
3. Use the up arrow or down arrow button to change the month.  
4. When the correct month is shown, press Enter to select it and  
highlight the day.  
5. Use the up arrow or down arrow button to change the day.  
6. When the correct day is shown, press Enter to select it and highlight  
the year.  
7. Use the up arrow or down arrow button to change the year.  
8. When the correct year is shown, press Enter to select it and return to  
the Clock menu.  
If you make an error, press Exit to move back to the value you need to  
reset. If you decide to abandon resetting the date, press Exit  
repeatedly until you return to the Clock menu.  
4–8  
975-0083-01-01  
 
     
Using the System Settings Menu  
Using the System Settings Menu  
The System Settings menu displays information related to the operation  
of the entire Xanbus system.  
To view the System menu:  
1. On the Select Device menu, use the down arrow button to highlight  
System.  
Figure 4-7 Selecting the System Settings menu  
2. Press Enter.  
The System Settings menu appears.  
Figure 4-8 System Settings menu  
975-0083-01-01  
4–9  
 
   
Configuration  
System Settings Menu Configuration Items  
Menu item Description  
Values/Action Default  
Mode  
Displays the current system  
Operating, Safe n/a  
mode as status information only.  
Desired  
Mode  
Sets the system mode.  
Operating, Safe Operating  
Global  
Menus  
Enables the display of advanced Advanced,  
Advanced  
or basic menus for all Xanbus-  
enabled devices in the system,  
including the System Control  
Panel (see page 5–5).  
Basic  
View Fault  
List  
Displays the Fault List screen,  
which shows active faults in the view list.  
system (up to 20). See page 5–  
14.  
Press Enter to  
n/a  
n/a  
n/a  
View  
Warning  
List  
Displays the Warning List screen, Press Enter to  
which shows active warnings in view list.  
the system (up to 20). See  
page 5–10.  
ViewDevice Displays the Device Info screen, Press Enter to  
Info  
which lists the serial number and view screen.  
software version for each  
Xanbus-enabled device in the  
system.  
Changing the system mode  
To change the System mode:  
1. On the System Settings menu, with Desired Mode highlighted, press  
Enter.  
2. Use the up arrow or down arrow button to view the available system  
modes—Operating and Safe.  
3. Press Enter to select a system mode.  
4. Press Exit twice to return to the System screen.  
4–10  
975-0083-01-01  
 
                 
System Settings Menu Configuration Items  
Safe mode  
You can also use the red System button to put the System Control Panel  
and all other Xanbus-enabled devices into Safe mode only by pressing  
and holding the System button for five seconds. For more information,  
see “Safe mode” on page 5–7.  
Viewing device information  
The Device Info screen shows the serial number and firmware revision  
for each Xanbus-enabled device. You cannot select or change any  
information on this screen.  
To view device information:  
1. On the System Settings menu, press the down arrow button to  
highlight View Device Info.  
2. Press Enter.  
The Device Info screen appears.  
809-0915  
1945447  
F/W Rev. 2.01.00 BN0002  
Figure 4-9 Device Info screen (showing Auto Gen Start info)  
3. Press the down arrow button to view information for each Xanbus-  
enabled device on the system.  
4. Press Exit to return to the System Settings menu.  
975-0083-01-01  
4–11  
 
         
4–12  
 
Operation  
5
Chapter 5 contains information and procedures for  
operating the System Control Panel, including:  
Reading screens and menus  
Displaying advanced menus  
Startup behavior  
System modes  
Faults and warnings  
 
     
Operation  
Reading Screens and Menus  
The System Control Panel displays several different screens and menus.  
The content of these screens and menus will change depending on power  
system activity or the device you have selected to view information for.  
During regular operation, you may need to view three screens or menus:  
System screen  
Select Device menu  
Device menu  
System screen  
Function  
The System screen is used to monitor system activity. You cannot select  
or change any of the information on the System screen. If you would like  
to view more detailed information for a Xanbus-enabled device, press  
Enter from the System screen to go to the Select Device menu.  
Appearance  
During normal operation, the System screen is the default screen. The  
numbers and graphics on this screen provide a summary of current system  
activity. The System screen’s appearance varies with the status of the  
inverter/charger (Standby, Inverting, Charging, AC Bypass, or Equalize).  
The basic elements appear as described in “System screen elements” on  
page 5–3.  
You can always identify the System screen by the Menu arrow pointing  
toward the Enter button on the System Control Panel.  
1
3
2
menu  
Figure 5-1 System screen (example)  
5–2  
975-0083-01-01  
 
     
Reading Screens and Menus  
Table 5-1 System screen elements  
Number Description  
1
2
3
Screen Title. The title is dynamic, changing as the inverter/  
charger status changes.  
Menu arrow. This arrow points to the Enter button. Pressing the  
Enter button takes you to the Select Device menu.  
Graphical status bar. This represents charger output voltage  
when inverter/charger is charging.  
Select Device menu  
Function  
The Select Device menu is a list of all the Xanbus-enabled devices in your  
power system, including the System Control Panel. You can select a  
device from this list to view its status and change its settings.  
Appearance  
The length of the Select Device menu will vary with the number of  
Xanbus-enabled devices installed.  
The System Panel, Clock, and System Settings menus are always  
available from the Select Device menu, regardless of the number of  
Xanbus-enabled devices installed.  
To view the Select Device menu:  
On the System screen, press the Enter button, as indicated by the  
Menu arrow.  
4
1
2
5
3
Figure 5-2 Select Device menu  
975-0083-01-01  
5–3  
 
       
Operation  
Number Description  
1
System Panel. Select this to view the System Panel menu and  
Panel.  
2
3
Clock. Select this to view the Clock menu and set the time, date,  
and 12/24-hour clock format.  
System. Select this to view the System Settings menu and change  
System modes. See “Using the System Settings Menu” on page 4–  
9.  
4
5
Menu up arrow. Indicates additional menu items above the top  
edge of the display.  
Scroll bar. Moves vertically as you select each device, indicating  
where you are on the menu.  
Device menu  
Each Xanbus-enabled device has its own menu showing its status and  
settings.  
To view a device menu:  
1. On the Select Device menu, use the up arrow or down arrow buttons  
to highlight the device you want to select.  
2. Press Enter.  
1
Off  
3
2
None  
[ManualOff]  
4
5
[On]  
Figure 5-3 Device menu (Auto Gen Start menu used as example)  
5–4  
975-0083-01-01  
 
 
Viewing Advanced Menus  
Table 5-2 Device menu elements  
Number Description  
1
2
Title. On a device menu, the title is not dynamic.  
Menu items. Configurable menu items are highlighted (white  
letters on black background) when selected.  
3
4
5
Status value.  
Configurable setting. Enclosed by square brackets.  
Menu down arrow. Indicates additional menu items below  
bottom edge of the display.  
Viewing Advanced Menus  
The System Control Panel displays device menus in two formats: basic  
and advanced. The number of items on a device menu will depend on  
whether you have selected to view the basic or advanced menu.  
Basic menus list status information and settings you may have to adjust  
routinely.  
Advanced menus list all the items on the basic menu as well as additional  
configuration options. Advanced menus also give you access to Fault,  
Warning and Event Logs.  
Displaying advanced menus for all devices  
The System Control Panel shows basic menus for all devices on the  
Xanbus system by default. If you would like to view advanced menus,  
you must go to the System Settings menu and select Global Menus.  
To view advanced menus for all devices:  
1. On the Select Device menu, use the down arrow button to highlight  
System.  
Figure 5-4 Highlighting System on the Select Device menu  
975-0083-01-01  
5–5  
 
     
Operation  
2. Press Enter.  
The System Settings menu appears.  
3. On the System Settings menu, use the down arrow button to highlight  
Global Menus.  
Figure 5-5 Highlighting Global Menus  
4. Press Enter.  
5. Use the up or down arrow buttons to select Advanced.  
6. Press Enter.  
Combining basic and advanced menus  
You can return to viewing the basic menu for any device by selecting  
Basic Menu from the advanced menu for that device.  
When the System Control Panel displays basic menus for some devices  
and advanced menus for other devices, you can display advanced menus  
for all devices again by using the following procedure.  
To view advanced menus for all devices again:  
1. On the System Settings menu, use the down arrow button to highlight  
Global Menus, then press Enter.  
2. Use the up or down arrow buttons to select Basic.  
3. Press Enter.  
4. With Global Menus highlighted again, press Enter.  
5. Use the up or down arrow buttons to select Advanced.  
6. Press Enter.  
5–6  
975-0083-01-01  
 
   
Startup Behavior  
When powering on the Xanbus system for the first time, the System  
Control Panel displays a fault message asking you to set the clock before  
proceeding. For procedures for setting the clock, see “Setting the time” on  
page 4–7 and “Setting the date” on page 4–8.  
System Modes  
The system modes described in this section affect the performance and  
behavior of the System Control Panel and all other Xanbus-enabled  
system in storage or when installing a new Xanbus-enabled device.  
Changing system modes  
System modes are changed using the System Settings menu (see “Using  
the System Settings Menu” on page 4–9). The four system modes are:  
Operating  
Safe  
Please read the section about each system mode to find out which mode is  
appropriate for different conditions or situations.  
Operating mode  
Characteristics  
The basic state of the System Control Panel is Operating mode. In  
Operating mode, the System Control Panel communicates with other  
Xanbus-enabled devices and displays all the network information it is  
configured to display.  
Safe mode  
Characteristics  
Selecting Safe mode stops the generator (if it is running) and puts the  
System Control Panel (and all Xanbus-enabled devices) into Safe mode.  
While in Safe mode, the System Control Panel remains powered,  
“listening” to and reporting its status to the network. However, the output  
power of all Xanbus-enabled devices is disabled and all inverting,  
charging, and generator starting activity stops.  
When to use  
Use Safe mode when you are adding or removing devices from the  
network. Authorized service personnel must also put the System Control  
Panel in Safe mode before performing software upgrades and diagnostics.  
975-0083-01-01  
5–7  
 
                   
Operation  
If the System Control Panel is powered off while in Safe mode, it will be  
in Safe mode when it is powered up again.  
To return to Operating mode:  
On the System Settings menu, under Desired Mode, select  
“Operating”.  
Warnings and Faults  
This section describes how fault and warning messages behave, and what  
you should do when they appear. For a complete list of System Control  
Panel fault and warning messages along with recommended actions to  
correct the fault or warning condition, please refer to Chapter 6,  
“Troubleshooting”.  
Important: The System Control Panel displays fault and warning messages  
for all Xanbus-enabled devices in the system. For information about fault and  
warnings for other devices, refer to the Troubleshooting chapter in the Owner’s  
Guide or Operation Guide for each device.  
Warning messages  
Warning messages will appear when the System Control Panel detects a  
condition that may eventually affect its continued operation. When a  
warning occurs, the System Control Panel will continue operating.  
However, you should consult the Troubleshooting chapter to find out  
what actions you can take to prevent the warning from escalating into a  
fault.  
continue  
cancel  
Figure 5-6 System Control Panel warning message  
Types  
There are two types of warning messages: manual and automatic. Each  
differs in its behavior and appearance. For a list of System Control Panel  
warnings and their associated types, refer to Chapter 6,  
“Troubleshooting”.  
5–8  
975-0083-01-01  
 
       
Warnings and Faults  
If you see a warning message on the System Control Panel, you will have  
to acknowledge it and (if necessary) clear it. Acknowledging the warning  
allows you to continue operating the System Control Panel. Clearing the  
warning message stops the warning condition from escalating into a fault.  
Acknowledging warning messages  
Automatic  
warnings  
Acknowledging an automatic warning message removes the message  
from the System Control Panel screen.  
To acknowledge an automatic warning message, press Enter. After you  
acknowledge the warning, the System Control Panel displays the menu  
for the device that caused the warning.  
warning message from the screen after three minutes. However, if the  
condition that caused the warning still exists, the warning message will  
reappear.  
You can view a list of the last 20 warning messages from the System  
Control Panel on the Warning log. See “Viewing the System Control  
Panel warning log” on page 5–10.  
Manual  
warnings  
A manual warning message requires you to make a choice (usually by  
pressing Enter for “yes” or Exit for “no”) before you can proceed  
monitoring or configuring the System Control Panel. It will not disappear  
after three minutes. After you respond to the warning message the System  
Control Panel will clear the warning message and return to the screen it  
was displaying before the warning message appeared.  
Clearing warning messages  
Automatic warning messages clear when the warning condition on the  
System Control Panel disappears or when the criteria for clearing the  
warning are met.  
You can clear a manual warning message by pressing Enter or Exit in  
response to the message.  
Viewing multiple warning messages  
If several warning messages occur before you can acknowledge or clear  
them, they are displayed together on a warning list. The warning list  
contains messages from every Xanbus-enabled device, not just the  
System Control Panel. You can select a message from the warning list  
and view its details.  
975-0083-01-01  
5–9  
 
     
Operation  
To view a message from the warning list:  
1. On the warning list, use the up arrow or down arrow button to  
highlight the warning message you want to view.  
2. Press Enter.  
The complete warning message appears.  
After viewing the warning message, you can return to the warning list by  
pressing Exit or continue to the menu for the device that caused the  
warning by pressing Enter. Each time you return to the warning list after  
viewing a complete message, the viewed message is removed from the  
list.  
If you have left the warning list, you can view it at any time from the  
System Settings menu.  
To view the warning list:  
1. On the Select Device menu, highlight System and press Enter.  
2. On the System Settings menu, highlight View Warning List and press  
Enter.  
Viewing the System Control Panel warning log  
The System Control Panel warning log displays the 20 most recent  
warnings that the System Control Panel generated. These warnings can be  
both active and cleared. Each warning in the log is identified by a warning  
code and the time that it occurred. You may need to refer to the warning  
log before consulting Chapter 6, “Troubleshooting”, or before you call  
technical support.  
To view the warning log:  
1. On the System Panel menu, press the down arrow button to highlight  
View Warning Log.  
2. Press Enter.  
To return to the System Panel menu:  
From the Warning log, press Exit.  
5–10  
975-0083-01-01  
 
     
Warnings and Faults  
Figure 5-7 System Control Panel warning log  
Viewing individual warning messages from the warning log  
On the warning log, you can also select an individual warning and view  
its details.  
To view details for a warning:  
1. Use the up arrow or down arrow button to highlight the warning  
message you want to view.  
2. Press Enter.  
The complete message appears.  
To return to the warning log:  
Press Exit (as indicated by the arrow marked “cancel”).  
To proceed to the device menu and reconfigure the device to eliminate  
the warning condition:  
Press Enter (as indicated by the arrow marked “continue”).  
Fault messages  
Fault messages appear when the System Control Panel’s operation is  
affected by a condition that requires immediate attention. When a fault  
occurs, the System Control Panel stops operating until either the fault  
condition goes away or until you manually clear the fault and take action  
to eliminate the fault condition.  
975-0083-01-01  
5–11  
 
     
Operation  
Figure 5-8 System Control Panel fault message  
Types of fault  
messages  
There are two types of System Control Panel fault messages: automatic  
and manual. For a list of faults and their associated types, refer to Chapter  
6, “Troubleshooting”.  
Automatic faults clear themselves automatically if the fault condition  
goes away.  
Manual faults require you to clear them by:  
selecting Clear Faults on the menu of the device that generated the  
fault (if the fault condition still exists, the fault message will  
reappear).  
correcting the condition that caused the fault.  
Viewing the System Control Panel fault log  
The fault log lists the most recent System Control Panel faults, up to a  
total of 20. On each line, the log shows the fault code, the date the fault  
occurred, and the time the fault occurred.  
To view the fault log:  
1. On the System Panel advanced menu, press the down arrow button to  
highlight Fault log.  
2. Press Enter.  
Figure 5-9 System Control Panel fault log  
5–12  
975-0083-01-01  
 
     
Warnings and Faults  
To return to the System Panel menu:  
Press Exit.  
Viewing individual fault messages from the fault log  
On the fault log, you can also select an individual fault and view its  
details.  
To view details for a fault:  
1. Use the up arrow or down arrow button to highlight the fault message  
you want to view.  
2. Press Enter.  
The complete fault message appears.  
To return to the fault log:  
Press Exit (as indicated by the arrow marked “cancel”).  
To proceed to the device menu and reconfigure the device to eliminate  
the fault condition:  
Press Enter (as indicated by the arrow marked “continue”).  
On the device menu, you can also attempt to clear the fault by selecting  
Clear Faults.  
Viewing multiple fault messages  
If several faults occur before you can acknowledge or clear them, the  
System Control Panel displays the accumulated messages on a fault list.  
The fault list displays messages from all network-enabled devices, not  
just the System Control Panel. You can select a message and view  
complete information for it from the fault list.  
To view a message from the fault list:  
1. On the fault list, use the up arrow or down arrow button to highlight  
the fault message you want to view.  
2. Press Enter.  
The complete fault message appears.  
3. To return to the fault list, press Exit.  
Or  
To return to the System Control Panel menu, press Enter.  
Each time you return to the fault list after viewing a complete message,  
the message you viewed is removed from the list.  
975-0083-01-01  
5–13  
 
     
Operation  
You can also view the fault list at any time.  
To view the fault list at any time:  
1. On the Select Device menu, use the up arrow or down arrow button to  
highlight System.  
2. Press Enter.  
3. On the System Settings menu, use the up arrow or down arrow button  
to highlight View Fault List.  
4. Press Enter.  
5–14  
975-0083-01-01  
 
 
Troubleshooting  
6
Chapter 6 contains reference tables of warning and  
fault messages.  
Use these tables to help you identify the cause of the  
fault or warning, and determine the best course of  
action to correct the condition that caused the fault or  
warning.  
 
     
Troubleshooting  
Troubleshooting Reference  
Types of Faults and Warnings  
The various types of fault and warning messages behave differently, and  
give you the option to treat them differently when they appear. For more  
information about the types of fault and warning messages, see “Types”  
on page 5–8 and “Types of fault messages” on page 5–12.  
Warning Reference Table  
Table 6-1 Warning reference table  
Warning  
number  
Message  
Type  
Cause  
Action  
W250  
The selected value  
failed to change. Try  
again.  
Automatic A temporary  
Try changing the value  
again.  
communication problem  
stopped the System  
Control Panel changing a  
value that you entered.  
W251  
Please confirm  
Manual  
You have selected the  
Press Enter to begin  
equalization process.  
Equalize command on the equalizing batteries or  
inverter/charger menu.  
Exit to return to the  
inverter/charger menu.  
W252  
W254  
Please confirm:  
Restore device’s  
default settings.  
Manual  
Manual  
You have selected the  
Restore Defaults  
command.  
Press Enter to restore  
default settings or Exit  
to cancel.  
Put system in Safe  
mode to change  
setting.  
The setting you are  
changing can only be  
changed when the system setting, then return the  
Put the system in Safe  
mode, change the  
is in Safe mode.  
system to Operating  
mode.  
W255  
W256  
System clock not set. Manual  
Set correct time.  
On initial startup, the  
clock needs to be set. The correct time.  
system will not operate  
Set the clock to the  
correctly until it is.  
No network  
Manual  
The System Control Panel Check network  
connection. Check  
connection to device.  
has lost communications connection between the  
with another device on the System Control Panel  
network.  
and the device.  
6–2  
975-0083-01-01  
 
       
Troubleshooting Reference  
Table 6-1 Warning reference table  
Warning  
number  
Message  
Type  
Cause  
Action  
W257  
New device detected. Manual  
Check device settings.  
You have connected a new Acknowledge the  
device to the network or  
reconnected a  
message and check that  
the device is properly  
configured.  
disconnected device.  
W501  
SCP has fixed a  
memory problem and  
restored default  
settings.  
Manual  
The System Control Panel Acknowledge the  
encountered an internal  
memory problem upon  
startup. To remain  
warning and reset  
configurable settings if  
necessary.  
operational, the System  
Control Panel restored its  
default settings.  
975-0083-01-01  
6–3  
 
Troubleshooting  
Fault Reference Table  
Table 6-2 Fault reference table  
Fault  
number Message  
Type  
Cause  
Action  
F500  
F501  
F503  
Internal failure.  
Service required.  
Manual  
The silicon serial ID number Reset the System  
has failed and the System Control Panel. If  
Control Panel has gone into problem persists, call  
Safe mode.  
customer service.  
Internal failure.  
Service required.  
Manual  
Manual  
The System Control Panel  
has suffered a non-volatile  
memory failure.  
Reset the System  
Control Panel. If  
problem persists, call  
customer service.  
Internal failure.  
Service required.  
The real-time clock in the  
System Control Panel has  
failed.  
Reset the System  
Control Panel by  
putting it in and  
taking it out of Power  
Save mode. If  
problem persists, call  
customer service.  
F504  
F505  
Network not available. Automatic The System Control Panel  
Check connection  
between the System  
Check connection,  
clear fault.  
has lost communications  
with the network because of Control Panel and the  
a faulty connection or  
electronic signal disruption.  
network.  
Internal failure. See  
guide.  
Manual  
A controller fault has  
occurred and the System  
Reset the System  
Control Panel. If  
Control Panel has gone into problem persists,  
Safe mode.  
disconnect and  
reconnect network  
cables, or put it in and  
take it out of Safe  
mode.  
6–4  
975-0083-01-01  
 
   
Specifications  
A
Appendix A contains the electrical and physical  
specifications for the System Control Panel.  
All specifications are subject to change without notice.  
 
   
Specifications  
Electrical Specifications  
Nominal input network voltage  
15 VDC  
Minimum operating network voltage 14.25 VDC  
Maximum operating network voltage 15.75 VDC  
Maximum operating current  
Communication physical layer  
Communication protocol  
Maximum cable length  
Connectors  
200 mA @ nominal input network voltage  
2, CAN  
Xanbus  
130 ft. (40 m)  
2 RJ45—8 pins  
Display  
dot matrix 128 × 64 LCD with white LED  
backlight  
Regulatory compliance  
CSA Certified to CSA 107.1 and UL 458,  
including the Marine Supplement  
Mechanical Specifications  
Dimensions  
Weight  
6 × 4 × 1.57 " (152 × 103 × 40 mm)  
0.46 lb (207 g)  
Mounting  
flush mounted, 4 #6 screws  
Environmental Specifications  
Operating temperature  
Storage temperature  
Maximum case temperature  
Operating humidity  
Storage humidity  
-4 to 122 °F (-20 to 50 °C)  
-40 to 185 °F (-40 to 85 °C)  
140 °F (60 °C)  
5% to 95%  
5% to 95%  
A–2  
975-0083-01-01  
 
           
Environmental Specifications  
AC In/Charge  
Inverter On  
Low Battery  
Fault  
System  
3.53  
[90] [102]  
4.03  
3.04 [77]  
Enter  
Exit  
System Control Panel  
.40  
[10]  
5.5 [140]  
6 [152]  
.96 [24]  
1.18 [30]  
ALL DIMENSIONS IN INCHES [mm]  
5 [127]  
0.125 [3] TYP.  
Figure A-1 System Control Panel dimensions  
975-0083-01-01  
A–3  
 
A–4  
 
Warranty and Return Information  
Warranty  
What does this warranty cover and how long does it last? This Limited Warranty is provided by  
Xantrex Technology Inc. (“Xantrex”) and covers defects in workmanship and materials in your System  
Control Panel. This warranty period lasts for 12 months from the date of purchase at the point of sale to  
you, the original end user customer, unless otherwise agreed in writing (the “Warranty Period”). You  
will be required to demonstrate proof of purchase to make warranty claims.  
This Limited Warranty is transferable to subsequent owners but only for the unexpired portion of the Warranty  
Period. Subsequent owners also require original proof of purchase as described in “What proof of purchase is  
required?”  
What will Xantrex do? During the Warranty Period Xantrex will, at its option, repair the product (if  
economically feasible) or replace the defective product free of charge, provided that you notify Xantrex  
of the product defect within the Warranty Period, and provided that Xantrex through inspection  
establishes the existence of such a defect and that it is covered by this Limited Warranty.  
Xantrex will, at its option, use new and/or reconditioned parts in performing warranty repair and  
building replacement products. Xantrex reserves the right to use parts or products of original or  
improved design in the repair or replacement. If Xantrex repairs or replaces a product, its warranty  
continues for the remaining portion of the original Warranty Period or 90 days from the date of the  
return shipment to the customer, whichever is greater. All replaced products and all parts removed from  
repaired products become the property of Xantrex.  
Xantrex covers both parts and labor necessary to repair the product, and return shipment to the customer  
via a Xantrex-selected non-expedited surface freight within the contiguous United States and Canada.  
Alaska, Hawaii and outside of the United States and Canada are excluded. Contact Xantrex Customer  
Service for details on freight policy for return shipments from excluded areas.  
How do you get service? If your product requires troubleshooting or warranty service, contact your  
merchant. If you are unable to contact your merchant, or the merchant is unable to provide service,  
contact Xantrex directly at:  
Telephone: 1 800 670 0707 (toll free North America)  
1 408 987 6030 (direct)  
Fax:  
1 800 994 7828 (toll free North America)  
Email:  
Website:  
Direct returns may be performed according to the Xantrex Return Material Authorization Policy  
described in your product manual. For some products, Xantrex maintains a network of regional  
Authorized Service Centers. Call Xantrex or check our website to see if your product can be repaired at  
one of these facilities.  
What proof of purchase is required? In any warranty claim, dated proof of purchase must  
accompany the product and the product must not have been disassembled or modified without prior  
written authorization by Xantrex.  
975-0083-01-01  
WA–1  
 
   
Warranty and Return  
Proof of purchase may be in any one of the following forms:  
The dated purchase receipt from the original purchase of the product at point of sale to the end  
user; or  
The dated dealer invoice or purchase receipt showing original equipment manufacturer (OEM)  
status; or  
The dated invoice or purchase receipt showing the product exchanged under warranty.  
What does this warranty not cover? Claims are limited to repair and replacement, or if in Xantrex's  
discretion that is not possible, reimbursement up to the purchase price paid for the product. Xantrex will  
be liable to you only for direct damages suffered by you and only up to a maximum amount equal to the  
purchase price of the product.  
This Limited Warranty does not warrant uninterrupted or error-free operation of the product or cover  
normal wear and tear of the product or costs related to the removal, installation, or troubleshooting of  
the customer's electrical systems. This warranty does not apply to and Xantrex will not be responsible  
for any defect in or damage to:  
a) the product if it has been misused, neglected, improperly installed, physically damaged or altered,  
either internally or externally, or damaged from improper use or use in an unsuitable environment;  
b) the product if it has been subjected to fire, water, generalized corrosion, biological infestations, or  
input voltage that creates operating conditions beyond the maximum or minimum limits listed in  
the Xantrex product specifications including but not limited to high input voltage from generators  
and lightning strikes;  
c) the product if repairs have been done to it other than by Xantrex or its authorized service centers  
(hereafter “ASCs”);  
d) the product if it is used as a component part of a product expressly warranted by another manufac-  
turer;  
e) component parts or monitoring systems supplied by you or purchased by Xantrex at your direction  
for incorporation into the product;  
f) the product if its original identification (trade-mark, serial number) markings have been defaced,  
altered, or removed;  
g) the product if it is located outside of the country where it was purchased; and  
h) any consequential losses that are attributable to the product losing power whether by product mal-  
function, installation error or misuse.  
Disclaimer  
Product  
THIS LIMITED WARRANTY IS THE SOLE AND EXCLUSIVE WARRANTY PROVIDED BY XANTREX IN CONNECTION WITH YOUR XANTREX  
PRODUCT AND IS, WHERE PERMITTED BY LAW, IN LIEU OF ALL OTHER WARRANTIES, CONDITIONS, GUARANTEES,  
REPRESENTATIONS, OBLIGATIONS AND LIABILITIES, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE IN CONNECTION WITH THE  
PRODUCT, HOWEVER ARISING (WHETHER BY CONTRACT, TORT, NEGLIGENCE, PRINCIPLES OF MANUFACTURER'S LIABILITY,  
OPERATION OF LAW, CONDUCT, STATEMENT OR OTHERWISE), INCLUDING WITHOUT RESTRICTION ANY IMPLIED WARRANTY OR  
CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ANY IMPLIED WARRANTY OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE TO THE EXTENT REQUIRED UNDER APPLICABLE LAW TO APPLY TO  
THE PRODUCT SHALL BE LIMITED IN DURATION TO THE PERIOD STIPULATED UNDER THIS LIMITED WARRANTY.  
IN NO EVENT WILL XANTREX BE LIABLE FOR: (A) ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING  
LOST PROFITS, LOST REVENUES, FAILURE TO REALIZE EXPECTED SAVINGS, OR OTHER COMMERCIAL OR ECONOMIC LOSSES OF ANY  
KIND, EVEN IF XANTREX HAS BEEN ADVISED, OR HAD REASON TO KNOW, OF THE POSSIBILITY OF SUCH DAMAGE; (B) ANY  
WA–2  
975-0083-01-01  
 
Warranty and Return  
LIABILITY ARISING IN TORT, WHETHER OR NOT ARISING OUT OF XANTREX'S NEGLIGENCE, AND ALL LOSSES OR DAMAGES TO ANY  
PROPERTY OR FOR ANY PERSONAL INJURY OR ECONOMIC LOSS OR DAMAGE CAUSED BY THE CONNECTION OF A PRODUCT TO ANY  
OTHER DEVICE OR SYSTEM; AND (C) ANY DAMAGE OR INJURY ARISING FROM OR AS A RESULT OF MISUSE OR ABUSE, OR THE  
INCORRECT INSTALLATION, INTEGRATION OR OPERATION OF THE PRODUCT BY PERSONS NOT AUTHORIZED BY XANTREX.  
Exclusions  
IF THIS PRODUCT IS A CONSUMER PRODUCT, FEDERAL LAW DOES NOT ALLOW AN EXCLUSION OF IMPLIED WARRANTIES. TO THE  
EXTENT YOU ARE ENTITLED TO IMPLIED WARRANTIES UNDER FEDERAL LAW, TO THE EXTENT PERMITTED BY APPLICABLE LAW  
THEY ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT  
ALLOW LIMITATIONS OR EXCLUSIONS ON IMPLIED WARRANTIES OR ON THE DURATION OF AN IMPLIED WARRANTY OR ON THE  
LIMITATION OR EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION(S) OR EXCLUSION(S) MAY  
NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS WHICH MAY  
VARY FROM STATE TO STATE, PROVINCE TO PROVINCE OR JURISDICTION TO JURISDICTION.  
Return Material Authorization Policy  
For those products that are not being repaired in the field and are being returned to Xantrex, before  
returning a product directly to Xantrex you must obtain a Return Material Authorization (RMA) number  
and the correct factory “Ship To” address. Products must also be shipped prepaid. Product shipments  
will be refused and returned at your expense if they are unauthorized, returned without an RMA number  
clearly marked on the outside of the shipping box, if they are shipped collect, or if they are shipped to  
the wrong location.  
When you contact Xantrex to obtain service, please have your instruction manual ready for reference  
and be prepared to supply:  
The serial number of your product  
Information about the installation and use of the unit  
Information about the failure and/or reason for the return  
A copy of your dated proof of purchase  
Record these details on page WA–4.  
Return Procedure  
Package the unit safely, preferably using the original box and packing materials. Please ensure that your  
product is shipped fully insured in the original packaging or equivalent. This warranty will not apply  
where the product is damaged due to improper packaging.  
Include the following:  
The RMA number supplied by Xantrex Technology Inc. clearly marked on the outside of the  
box.  
A return address where the unit can be shipped. Post office boxes are not acceptable.  
A contact telephone number where you can be reached during work hours.  
A brief description of the problem.  
Ship the unit prepaid to the address provided by your Xantrex customer service representative.  
If you are returning a product from outside of the USA or Canada In addition to the above, you  
MUST include return freight funds and are fully responsible for all documents, duties, tariffs, and  
deposits.  
975-0083-01-01  
WA–3  
 
Warranty and Return  
If you are returning a product to a Xantrex Authorized Service Center (ASC) A Xantrex return  
material authorization (RMA) number is not required. However, you must contact the ASC prior to  
returning the product or presenting the unit to verify any return procedures that may apply to that  
particular facility and that the ASC repairs this particular Xantrex product.  
Out of Warranty Service  
If the warranty period for your product has expired, if the unit was damaged by misuse or incorrect  
installation, if other conditions of the warranty have not been met, or if no dated proof of purchase is  
available, your unit may be serviced or replaced for a flat fee.  
To return your product for out of warranty service, contact Xantrex Customer Service for a Return  
Material Authorization (RMA) number and follow the other steps outlined in “Return Procedure” on  
page WA–3.  
Payment options such as credit card or money order will be explained by the Customer Service  
Representative. In cases where the minimum flat fee does not apply, as with incomplete units or units  
with excessive damage, an additional fee will be charged. If applicable, you will be contacted by  
Customer Service once your unit has been received.  
Information About Your System  
As soon as you open your System Control Panel package, record the following information and be sure  
to keep your proof of purchase.  
______________________  
809-0910  
Serial Number  
Product Number  
Purchased From  
Purchase Date  
______________________  
______________________  
If you need to contact Customer Service, please record the following details before calling. This  
information will help our representatives give you better service.  
______________________  
______________________  
______________________  
______________________  
______________________  
______________________  
______________________  
______________________  
______________________  
Type of installation (e.g. RV, truck)  
Length of time SCP has been installed  
Battery/battery bank size  
Battery type (e.g. flooded, sealed gel cell, AGM)  
DC wiring size and length  
Alarm sounding?  
Description of indicators on front panel  
Appliances operating when problem occurred  
Description of problem  
WA–4  
975-0083-01-01  
 
   
Index  
Enter button 1–4, 3–2  
Event log 4–5  
Numerics  
12/24 Hour 4–7  
Exit button 1–4, 3–2  
A
AC In/Charge light 1–4  
advanced menu  
F
Fault Alarm 4–5  
Fault light 1–4  
configuration reference 4–5  
displaying for all devices 5–6  
viewing 4–10  
Fault list 4–10, 5–13  
Fault log 4–5, 5–12  
B
clearing 4–4  
types 5–11  
fault reference table 6–4  
firmware revision 1–iii, 4–11  
backlight timer 4–5  
basic menu  
configuration reference 4–4  
reverting to viewing 4–5  
brightness 4–4  
G
Button Beep 4–4  
command 4–10  
C
changing device settings 3–4  
Clear Faults 4–4  
Clock menu  
installation  
connecting network cables 2–4  
mounting 2–3  
planning 2–2  
configuration reference 4–7  
using 4–6  
configuration  
any network-enabled device 3–2  
contrast 4–4  
Inverter On light 1–4  
Light Timer 4–5  
LoBatt Alarm 4–5  
Low Battery light 1–4  
D
date, setting 4–8  
Device Information 4–10, 4–11  
Device menu  
defined 3–4  
illustration 3–6  
mechanical specifications A–2  
Menu arrow 5–3  
menu map 3–3  
Down arrow button 1–4, 3–2  
Mode 4–10  
mounting template 2–2, 2–3  
E
electrical specifications A–2  
 
 
Index  
N
navigation  
Up arrow button 1–4, 3–2  
menu map 3–3  
using buttons 3–2  
network cables 2–4  
network connectors 1–5  
network diagram 1–6  
network power consumption 1–2  
V
verifying network power 2–4  
View Event Log 4–5  
View Fault Log 4–5  
View Warning Log 4–5  
O
W
Operating mode 5–7  
Warning List 4–10  
Warning log 4–5, 5–10  
warning messages 5–8  
warning reference table 6–2  
P
Power Save mode 5–7  
proof of purchase WA–4  
X
R
Restore Defaults 4–5  
RJ45 connectors 1–5  
S
Select Device menu 3–4, 5–3  
Select Device menu illustration 3–5  
serial number 4–10  
Set Date 4–7  
Set Degrees 4–5  
Set Time 4–7  
specifications A–2  
startup behavior 5–7  
startup screen 3–4  
System button 1–4, 4–11  
system modes 5–7  
changing 4–10  
System screen 3–4, 5–2  
System screen illustration 3–5  
T
time, format and setting 4–7  
IX–2  
975-0083-01-01  
 
 
Xantrex Technology Inc.  
1 800 670 0707 Tel toll free NA  
1 360 925 5097 Tel direct  
1 800 994 7828 Fax toll free NA  
1 360 925 5143 Fax direct  
Printed in China  
975-0083-01-01  
 

Weslo Treadmill 831295020 User Manual
Weslo Treadmill WLTL21191 User Manual
Western Telematic Network Card Data FaxModem User Manual
Whirlpool Washer Dryer LA7899XP User Manual
White Bear Technologies GPS Receiver RoamEO GPS Pet Location System User Manual
Xerox Printer QLS 8100XE User Manual
X Micro Tech Network Router XWL 11GRTX User Manual
Xpelair Fan DX100HP User Manual
Yamaha Musical Instrument CLP 153SG User Manual
Yamaha Welding System 3 axis model User Manual