Whirlpool Oven W10203506A User Manual

INSTALLATION INSTRUCTIONS  
24" (61.0 CM) ELECTRIC SINGLE AND DOUBLE  
BUILT-IN OVEN  
Table of Contents  
BUILT-IN OVEN SAFETY............................................................... 1  
INSTALLATION REQUIREMENTS................................................ 2  
Tools and Parts............................................................................ 2  
Location Requirements ............................................................... 2  
Electrical Requirements............................................................... 3  
INSTALLATION INSTRUCTIONS.................................................. 4  
Prepare Built-In Oven.................................................................. 4  
Oven Door.................................................................................... 4  
Make Electrical Connection......................................................... 5  
Install Oven .................................................................................. 7  
Complete Installation................................................................... 8  
BUILT-IN OVEN SAFETY  
Your safety and the safety of others are very important.  
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety  
messages.  
This is the safety alert symbol.  
This symbol alerts you to potential hazards that can kill or hurt you and others.  
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”  
These words mean:  
You can be killed or seriously injured if you don't immediately  
follow instructions.  
DANGER  
You can be killed or seriously injured if you don't  
instructions.  
follow  
WARNING  
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can  
happen if the instructions are not followed.  
IMPORTANT:  
Save for local electrical inspector's use.  
W10203506A  
 
Product Dimensions - Double Oven  
Cabinet Side View - Double or Single Oven  
A
A
B
B
E
C
D
E
A. 24"(61 cm) min. cutout depth  
B. 22⁵⁄₈" (57.5 cm) recessed oven depth  
C. Oven front  
D. Recessed oven  
E. Cabinet  
C
D
Electrical Requirements  
If codes permit and a separate ground wire is used, it is  
recommended that a qualified electrical installer determine that  
the ground path and the wire gauge are in accordance with local  
codes.  
A. 22¹⁄₄" (56.5 cm) max. recessed width  
B. 46⁵⁄₁₆" (117.6 cm) max. overall height  
C. 23⁷⁄₈" (60.6 cm) overall width  
D. 22⁵⁄₈" (57.5 cm) max. recessed depth  
E. 44⁵⁄₈" (113.4 cm) recessed height  
Check with a qualified electrical installer if you are not sure the  
oven is properly grounded.  
This oven must be connected to a grounded metal, permanent  
wiring system.  
Cabinet Dimensions - Double Oven  
Be sure that the electrical connection and wire size are adequate  
and in conformance with the National Electrical Code, ANSI/  
NFPA 70-latest edition or CSA Standards C22.1-94, Canadian  
Electrical Code, Part 1 and C22.2 No. O-M91-latest edition, and  
all local codes and ordinances.  
Double Oven Installed in Cabinet  
A
B
A copy of the above code standards can be obtained from:  
National Fire Protection Association  
One Batterymarch Park  
Quincy, MA 02269  
CSA International  
8501 East Pleasant Valley Road  
Cleveland, OH 44131-5575  
F
D
Electrical Connection  
To properly install your oven, you must determine the type of  
electrical connection you will be using and follow the instructions  
provided for it here.  
E
C
Oven must be connected to the proper electrical voltage and  
frequency as specified on the model/serial number rating  
plate. The model/serial number rating plate is located at the  
bottom right-hand oven surface. See the following illustration.  
A. 24" (61 cm) min. cabinet width  
B. 1¹⁄₂" (3.8 cm) top of cutout to bottom of upper  
cabinet door  
C. 17" (43.2 cm) min. bottom of cutout to floor  
D. 22³⁄₈" (56.8 cm) cutout width  
E. 1¹⁄₂" (3.8 cm) min. bottom of cutout to top of  
cabinet door  
F. 45³⁄₈" (115.3 cm) cutout height  
3
 
A circuit breaker (or time-delay fuse) is recommended.  
Connect directly to the circuit breaker box (or fused  
disconnect) through flexible, armored or nonmetallic  
sheathed, copper cable (with grounding wire). See “Make  
Electrical Connection” section.  
A
Flexible conduit from the oven should be connected directly  
to the junction box.  
A
Do not cut the conduit. The length of conduit provided is for  
serviceability of the oven.  
A UL listed or CSA approved conduit connector must be  
provided.  
If the house has aluminum wiring follow the procedure below:  
Single Oven  
A. Model/serial number plate  
Double Oven  
A. Model/serial number plate  
1. Connect a section of solid copper wire to the ends of the  
flexible conduit leads.  
2. Connect the aluminum wiring to the added section of  
copper wire using special connectors and/or tools  
designed and UL listed for joining copper to aluminum.  
Follow the electrical connector manufacturer's recommended  
procedure. Aluminum/copper connection must conform with  
local codes and industry accepted wiring practices.  
Double oven model rated from 6.5 kw to 8.6 kw at 208 V to  
240 V requires a separate 40 amp circuit.  
Single oven model rated at 4.4 kw to 5.8 kw at 208 V to 240 V  
requires a separate 30 amp circuit.  
INSTALLATION INSTRUCTIONS  
Prepare Built-In Oven  
1. Decide on the final location for the oven. Locate existing  
wiring to avoid drilling into or severing wiring during  
installation.  
Remove Oven Door.  
IMPORTANT: Use both hands to remove oven doors.  
1. Open door to the broil stop position (about 4 to 6 inches).  
2. Grasp sides of the door at the middle. Slowly lift door straight  
up.  
WARNING  
Excessive Weight Hazard  
Use two or more people to move and install oven.  
Failure to do so can result in back or other injury.  
2. To avoid floor damage, set the oven onto cardboard prior to  
installation. Do not use handle or any portion of the front  
frame or trim for lifting.  
3. Remove the shipping materials and tape from the oven.  
4. Remove the hardware package from inside the bag  
containing literature.  
3. While lifting the door up, very slightly open the door by pulling  
it forward. Check that the latches swing down into the  
notches on the hinge arms.  
5. Remove and set aside racks and other parts from inside the  
oven.  
6. Move oven and cardboard close to the oven’s final location.  
4
 
Make Electrical Connection  
For Double Ovens  
For Single Ovens  
WARNING  
WARNING  
Electrical Shock Hazard  
Disconnect power before servicing.  
Use 8 gauge solid copper wire.  
Electrically ground oven.  
Electrical Shock Hazard  
Disconnect power before servicing.  
Use 12 gauge solid copper wire.  
Electrically ground oven.  
Failure to follow these instructions can result in death,  
fire, or electrical shock.  
Failure to follow these instructions can result in death,  
fire, or electrical shock.  
Make Electrical Connection  
This oven is manufactured with a neutral (white) power supply  
wire and a cabinet-connected green (or bare) ground wire twisted  
together.  
Electrical Connection Options Chart  
If your home has:  
Go to section:  
1. Disconnect power.  
4-wire  
4-wire Cable from Home  
Power Supply  
2. Feed the flexible conduit from the oven through the opening  
in the cabinet.  
3. Remove junction box cover, if it is present.  
4. Install a UL listed or CSA approved conduit connector to the  
½"  
(1.3 cm)  
junction box.  
3-wire  
3-wire Cable from Home  
Power Supply  
A
½"  
A. UL listed or CSA approved conduit connector  
(1.3 cm)  
5. Route the flexible conduit from the oven to the junction box  
through a UL listed or CSA approved conduit connector.  
6. Tighten screws on conduit connector.  
7. See “Electrical Connection Options Chart” to complete  
installation for your type of electrical connection.  
5
 
4-Wire Cable from Home Power Supply  
3-Wire Cable from Home Power Supply - U.S. Only  
IMPORTANT: Use the 4-wire cable from home power supply in  
the U.S. where local codes do not allow grounding through  
neutral, New Branch circuit installations (1996 NEC), mobile  
homes and recreational vehicles, new construction and in  
Canada.  
IMPORTANT: Use the 3-wire cable from home power supply  
where local codes permit a 3-wire connection.  
A
B
C
A
B
G
E
F
H
D
E
G
I
F
H
I
C
D
A. Cable from home power supply  
B. Junction box  
C. Black wires  
D. White wires  
E. Green (or bare) ground wire  
(from oven)  
F. 4-wire flexible conduit from  
oven  
G. Red wires  
H. UL listed wire connectors  
I. UL listed or CSA approved  
conduit connector  
A. Cable from home power supply  
B. Black wires  
C. Red wires  
D. 4-wire flexible conduit from  
oven  
F. White wires  
G. UL listed wire connectors  
H. Green (or bare) ground wires  
I. UL listed or CSA approved  
conduit connector  
E. Junction box  
1. Connect the 2 black wires (C) together using a UL listed wire  
1. Connect the 2 black wires (B) together using a UL listed wire  
connector.  
connector.  
2. Connect the 2 white wires (D) and the green (or bare) ground  
2. Connect the 2 red wires (C) together using a UL listed wire  
wire (of the oven cable) using a UL listed wire connector.  
connector.  
3. Connect the 2 red wires (G) together using a UL listed wire  
3. Untwist white wire from green (or bare) ground wire coming  
connector.  
from the oven.  
4. Install junction box cover.  
4. Connect the 2 white wires (F) together using a UL listed wire  
connector.  
5. Connect the green (or bare) ground wire (H) from the oven  
cable to the green (or bare) ground wire (in the junction box)  
using a UL listed wire connector.  
6. Install junction box cover.  
6
 
Install Oven  
3. Securely fasten oven to cabinet using the 0.188 x 2.1" screws  
(4 for single oven, 6 for double oven) provided. Insert the  
screws through holes in decorative trim. To avoid cabinet  
damage, use the 0.140" diameter (number 28) drill bit to pre-  
drill the pilot holes before driving screws. Do not overtighten  
screws.  
WARNING  
Excessive Weight Hazard  
Use two or more people to move and install oven.  
Failure to do so can result in back or other injury.  
A
B
1. Using 2 or more people, lift oven partially into cabinet cutout.  
Use the oven opening as an area to grip.  
NOTE: Push against seal area of oven front frame when  
pushing oven into cabinet. Do not push against outside  
edges.  
A. Decorative trim  
B. Insert screw.  
4. Replace oven racks.  
5. Grasp sides of the door and align slots in door with the hinge  
arms.  
6. Slightly pull the door open as you slide the door down onto  
the hinge arms. The sliding action of the door will disengage  
the latches on the hinge arms.  
2. Push oven completely into cabinet and center oven into  
cabinet cutout.  
7. Gently push the door downward until the door rests evenly on  
the hinges.  
8. Close door.  
9. Repeat for lower oven door.  
10. Reconnect power.  
11. Display panel will light briefly, and “PF” should appear in the  
display.  
12. If display panel does not light, please reference the  
“Assistance or Service” section of the Use and Care Guide or  
contact the dealer from whom you purchased your oven.  
7
 
Complete Installation  
1. Check that all parts are now installed. If there is an extra part,  
Electrical supply is connected.  
See “Troubleshooting” section in the Use and Care Guide.  
go back through the steps to see which step was skipped.  
2. Check that you have all of your tools.  
3. Dispose of/recycle all packaging materials.  
4. When oven has been on for 5 minutes, feel for heat.  
If you do not feel heat or if an “F” followed by a number  
appears in the display, turn off the oven and contact a  
qualified technician.  
4. For oven use and cleaning, read the Use and Care Guide.  
Check Operation of Oven(s)  
1. Turn power on. The time should flash in the display.  
5. Press CANCEL.  
2. Check that the oven door(s) is closed  
If you need Assistance or Service:  
3. Turn on the oven(s) Broil function. See the User Instructions  
Please reference the “Assistance or Service” section of the Use  
and Care Guide or contact the dealer from whom you purchased  
your built-in oven.  
for more information.  
If oven(s) does not operate, check the following:  
Household fuse is intact and tight; or circuit breaker has  
not tripped.  
W10203506A  
© 2008  
7/08  
Printed in U.S.A.  
All rights reserved.  
®Registered Trademark/ ™ Trademark of Maytag Corporation or its related companies.  
 

Whirlpool Ventilation Hood IH7302RS0 User Manual
Whirlpool Washer WTW6600SB2 User Manual
Wolf Appliance Company Range DO30 2F S User Manual
Wolf Cooktop SRT304 User Manual
Xerox Printer Accessories 3R11500 User Manual
Yamaha Jet Ski FZR User Manual
Zanussi Dishwasher DE 4744 User Manual
Zanussi Freezer ZCF 115 C User Manual
Zanussi Washer TSE 1062 V User Manual
Zebra Technologies Pet Fence 14245L 003 User Manual